Lighting Accessories

Madrix Software Entry Key - MI Bar Software / 2D Pixel Mapping / 3D Voxel Mapping / Pixel Mapping 
The MADRIX KEY is a USB dongle that unlocks the features or output for the MADRIX 5 Software or MADRIX RADAR Software by holding the corresponding license. You can freely switch between different PCs as it is not bound to a specific system.
Choose from 5 different effect categories and over 55 built-in effects. SCE Effects do not require any sound and make up the most diverse set of patterns and effects. S2L, short for Sound2Light, brings your audio input to life. M2L, short for Music2Light, takes audio-based effects to an even deeper level. MAS allows you to create effects from scratch with the help of the advanced MADRIX scripting language. TRI, short for Trigger, adds a whole new level of interactivity as you can set off visuals with your manual input.
DMX Channels - 4,096DMX Universes - 8RGB Voxels - 1,365Upgradable Validity - Lifetime
DVI Voxels - 16,384Render Resolution - 128 x 128

Cobra 3.1 Fog Generator Look Solutions - Dry Fog Machine
-230V only
- New, extremely silent nozzleWith its newly developed nozzle the machine works very silent. The noise level at full output is 82.5 dBA (in compa- rison: the Viper 2.6 with 2600 Watt generats at full output 100.5 dBA).The nozzle can be unscrewed and cleaned as needed.
- Two pumps for constant outputThe use of two pumps ensures a very constant fog output at any pump level.Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are re- gulated by a second, more powerful pump.
- New TouchscreenAll adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation.
- New controlsBeside the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN).
- RDM-capableThe Cobra 3.1 is equipped with the following RDM-features: - Status: Ready, Re-heating, Error messages (E-1, E-2 etc) - DMX-Patch- Temperature: Heating element, PCB- Adjusting the Personality- General Informations about the machine
newly developed, extremly silent nozzle
constant, steady Output
DMX, Ethernet, RDM
Made in Germany
- Finest adjustments of the outputDigital technology enables ne adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 100%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room.
- Adjustable Pump characteristicDepending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characte- ristics: Impulse, Extended, Flood and Continuous.The output and fogging time varies depending on the choo- sen pump characteristic.
- Adjustable Performance curveFor nest adjustments of the pump from 0% - 30%. In these- pump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process in uences the output. Thus, different fog amounts can be balanced.
- Internal TimerWith the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
-Working hours counterThe Cobra 3.1 is equipped with an working hours counter, that saves heating and fogging durations.
Liquid
The following Look fog liquids are available for the Cobra 3.1:
Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
USE
Smoke producing machineFog generator machineHaze generator

USE

• Smoke Producing Machine
• Fog Generator Machine
• Haze Generator