LBT Electronics Private Limited

Universal DMX controller for 40 units with a max of 36 channels each 

Constant monitoring of output parameters thanks to a large backlit display 

• Control blocks of 6 channels using the scroll function 
• Assign functions o the faders with the editable internal libraries 
• 40 chases – Programs – Presets – Psychos. 
• Ensure perfect fixture poisoning with a two-ordinate system: absolute  and relative 
• Mount in a standard 19” rack (5 units), or use as a desk-top unit 
• SMPTE socket for changing memories in sync, independent regulation of scene and preset crossfade times 
• Audio input and built-in microphone for music sync functions 
• MIDI in/thru/out connector 
• Data and memories can be downloaded to PC 
• Jack socket for a pedal for stepping up/down through memories 
• Universal AL4 switching power supply included 
• Net Weight: 3.24kg 
• Gross Weight: 4.48kg 
• Product Size: 49×22.5x8cm 
• Packaging Size: 59.5x33x18cm 

• With Midi Socket, can make the library on the console
• 1024 DMX512 channels
• 96 Mang fixes
• Support for fixtures re-connected with the address code
• Each scanner max available control channels: 40 main channel + 40 trim
• R20 pearl light library support
• 60 scenes can be saved, 10 scenes can be run simultaneously
• 600 steps in a mul-tep scenario
• Fade in, Fade out, LTP sliding control
• 5 graphics can be stored for each scene
• 10 graphics can be run at the same me
• Supports fader scenes, dimming, interlock scene and point control scenarios
• Graphics generator, dimmer, P/T, RGB, CMY, Color, Gobo, lris, Focus Graphics
• Master fader: Global, repeat, lighting
• Supports now black, dial and fader to adjust channel values and fader dimmer

Specification

• Model: BW-C2-Art-Net-16×512(A16)
• Power supply: AC100-240V 50-60Hz
• Cable: Net Cable
• DMX 512 (Out): 16×512 DMX Channels
• DMX 512 Ports: 3Pin XLR Female
• Ethernet/Art-Net: Rj45
• Case: Metal Enclosure
• Dimension(Body): 440mm x 110mm x 45mm
• Dimension(With Brackets): 490mm x 110mm x 45mm
• Weight: 2.2kg

Connection

1. Input Voltage: AC100-240V
2. SWITCH ON / OFF
3. LCD display (IP address show, subnet mask show)
4. Setting Key (Long press Setting Key, The 1st part IP address of display screen begin to flash, entry and choose IP address / subnet mask
5. +10 Key (IP address value/ subnet mask value +10)
6. + Key (IP address value/ subnet mask value +10)
7. RJ45 (RJ45 interface has two indicator light—Green, Yellow),  normal is lighting up Green, Yellow is flash
8. Output indicator light (Flash is output normal)
9. Power indicator light (connect with power supply, if the light is normal on, it’s correct)
10. DMX/512/1990 signal output port

Additional Information:

• Packaging Details: 440mm x 110mm x 45mm